iCT 100A 2NO 220…240V 50Hz contactor
Rp2.013.418
Deskripsi
| range of product | Acti9 |
|---|---|
| Product name | Acti9 iCT |
| Product or component type | Contactor |
| device short name | ICT |
| Device application | Heating-low inductive load |
| Poles | 2P |
| [Ie] rated operational current | 100 A AC-7A |
| Pole contact composition | 2 NO |
| Network type | AC |
| Utilisation category | AC-1 conforming to EN 60947-4-1 AC-7A conforming to EN 61095 AC-7A conforming to IEC 61095 AC-7A conforming to UTE C 61-481 AC-1 conforming to IEC 60947-4-1 |
| Control type | Remote control |
| [Uc] control circuit voltage | 220…240 V AC 50 Hz |
| Network frequency | 50 Hz |
|---|---|
| [Ue] rated operational voltage | 250 V AC 50 Hz |
| Maximum power | AC-7A: 2.1 W at 250 V AC 50 Hz |
| [Ui] rated insulation voltage | 500 V AC 50 Hz |
| [Uimp] rated impulse withstand voltage | 4 kV |
| Control signal type | Maintained |
| Switching frequency | 100 switching operations/day |
| Local signalling | Action indicator |
| Hold-in power consumption in VA | 6.5 VA |
| Inrush power in VA | 53 VA |
| Mounting mode | Clip-on |
| Mounting support | 35 mm symmetrical DIN rail |
| 9 mm pitches | 6 |
| Height | 85 mm |
| Width | 54 mm |
| Depth | 60 mm |
| Colour | White |
| Electrical durability | 30000 cycles EN 61095 250 V 16 A AC 50 Hz AC-7A 30000 cycles UTE C 61-481 250 V 6 A AC 50 Hz AC-7A 30000 cycles IEC 61095 250 V AC 50 Hz AC-7A |
| Connections – terminals | Control circuit: tunnel type terminals2 cable(s) 1.5 mm² rigid Control circuit: tunnel type terminals1 cable(s) 1.5…2.5 mm² rigid Control circuit: tunnel type terminals2 cable(s) 1.5…2.5 mm² flexible Power circuit: tunnel type terminals1 cable(s) 6…35 mm² solid or flexible |
| Tightening torque | Power circuit: 3.5 N.m Control circuit: 0.8 N.m A1 / A2 |
| Product compatibility | IACTs IACTp IATEt IACTc |
| Compatibility code | ICT |
| Market segment | Small commercial Residential |
